FOREVER Flex-Soft (No-Cut) Self Weeding Transfer Paper (Metallic Colors)

↓ DOWNLOAD INSTRUCTIONS ↓

FOREVER Flex-Soft (No-Cut)

Now you can produce self-weeding transfers in white, metallic and neon colors, without a special toner and without cutting and weeding. The most annoying step, the weeding of the flex foils, is no longer required with this new and innovative material.

Our well-known 2-Paper-System now with the difference, that the A-Foil coating is colored with the single colors of White, Metallic or Neon, instead of being transparent. This offers the possibility of very fast production in a cost effective way, without investing in an expensive printing system or plotter.

It has all the combined characteristics of the established Flex Foil, with the additional benefit of our (No-Cut) system.

The 2-Paper-System from FOREVER gives amazing and consistent results.

First print on the transparent A-Foil, press it together with the dark opaque B-Paper LowTemp and separate both sheets from each other while hot.
Now, you have white coverage on the image through the B-Paper LowTemp, which not only increases the opacity of the transfer on dark garments but also contributes to its washability. Both steps are done at the same temperature. The application tolerances are extremely high, reducing handling errors and allowing the user high flexibility.

Flex-Soft (No-Cut) A-FOIL
This is the transfer foil on which you print your image. It holds the toner extremely well and does not leave any residues in the copier or any background on the garment.

B-PAPER LowTemp
The white opaque coating on the B-Paper sheet only sticks to the toner on the A-Foil and performs so well that even the finest detailed designs can be handled.

• No Cutting and No Weeding
• Low substrate application temperatures of 100-160°C (212°F-320°F)
• Printing of almost all fabrics & hard surfaces (Cotton, Blended Fabrics, Polyester, Nylon, Polypropylene, Paper, Wood, etc.)
• For Black & White or CMYK Laser/LED Printers and Copiers
• Washable up to 40°C (104°F)
• Fine details and difficult graphics transferable without problems
• Huge time savings
• Unbelievable design and motive possibilities (vintage, used look, fashion, vectors)
• Available in  A4, A3

TRANSFERRING WITH FLEX-SOFT (NO-CUT) & B-PAPER

Preparation of the Transfer:

• Print your design in Mirror Image Mode with a 400% Black on the Matte side of the Flex-Soft (No-Cut) Foil.
• Press together with B-Paper LowTemp 
• Separate the A-Foil and B-Paper while hot.
• Cut around your design to remove the bleed coating.
• Your transfer is now prepared.

Application: Transferring to Textile

• Position the transfer on your textile.
• Press together .
• Separate the A-Foil from the textile after it is completely cold.
• Repress with a sheet of Matt Finishing Economy for a Matt look & higher washability.